No products in the cart.
70LPM = 1.16LPS at 27m head Borehole Pump w/with Franklin Motor
OEM Borehole Pump with Franklin Motor
Assembly includes pump and motor only.
80 litres per min / 1.33 litres per second @ 22m head
70 litres per min /1.16 litres per second @ 27 m head
60 litres per min /1 litre per second @ 32m head
50 litres per min / 0.83 litres per second @ 35m head
40 litres per min / 0.66 litres per second @ 37m head
This model has a 0.55kw/0.75hp 2-wire 1 phase Franklin Electric motor.
The 2-wire 1 phase motor doesn’t require a starter box. The Franklin 2-wire motors have a BIAC switch in the motor instead of a capacitor which is much more reliable.
There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below.
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this pump
This model has a 1.5″ (40mm) discharge thread, so if you are using 50mm pipe diameter then a 2″ Bore Cap would be recommended. If you are using a 1.5″(40mm) pipe diameter then a 1.5″ Bore Cap would be recommended.
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 50mm pipe diameter then a 50 x 100mm (2″ riser) PVC Shroud Adapter would be recommended.
The info below is a guide only, you must check with your electrician on cable size.
1 Phase Cable (2-wire/3 core) – 1.5mm sq cable up to 55m, 2.5mm sq cable up to 90m, 4mm sq up to 140m.
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.
Flexible Riser Pipe
– Series 100 is for depths up to 100. The sizes are 32 mm and 50 mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm, 50mm, 76mm, 102mm, 127mm, 152mm & 200mm internal diameter.
– As well as the Couplings, ties, joiners and installation roller.
Single 1 Phase Motor Protection
If you purchase a single phase 2-wire or 3-wire kit, then you will need a Pumptec as your motor protection device.
1 Year Pump Warranty
2 Year Motor Warranty
|Litres Per Minute||
Franklin Electric, OEM
|kW / Hp||
0.55 / 0.75