Sewage Ejector Pumps Australia

Sewage Ejector Pumps are designed to remove sewage from a building where plumbing fixtures and their drains are lower than the building sewer line and/or septic tank.

You need a Sewage Ejector Pump when the house is higher than the septic

If there is not enough fall from the house to the septic system or septic line then a sewage ejector pump is needed.  They will need to be housed inside a tank or pit.

These small pumping systems usually include  a small tank with a sewage pump.  The sewage pumping systems may be required to store the fluids under the house and pump them uphill to reach the septic.

Which Sewage Ejector Pump do I need?

If you are pumping raw sewage (which is normally the case) the pump will usually be a  grinder pump or a cutter pump.  A cutter pump costs less and can cut up raw sewage and toilet paper only (no female sanitary products).  The cutter pumps are mostly used in private homes.  A grinder pump can grind up almost anything that is thrown down a toilet and are commonly used for public venues.

If you are only pumping grey water then a normal septic pump can be used.

All of the pumps can be automatic (with a float switch or controller) or manual.

Weather it is a cutter, grinder, septic or sump pump, the model required will depend on the job it needs to do.  To work this out you will need to know the total head and flow needed.  We can help you with this.  Just fill in our quote form and we will let you know which pump or system you need.  The sewage pumping systems are custom made so will need to be quoted for.

Showing all 25 results

Showing all 25 results