Pentax 4″ Bore Pump with Franklin Electric motor assembly.
Assembly includes pump and motor only.
260 liters per min 4.33 liters per second @ 37m head
240 liters per min 4.00 liters per second @ 48m head
220 liters per min 3.66 liters per second @ 58m head
200 liters per min 3.33 liters per second @ 68m head
180 liters per min 3.00 liters per second @ 76m head
160 liters per min 2.66 liters per second @ 89m head
140 liters per min 2.33 liters per second @ 91m head
120 liters per min 2.00 liters per second @ 97m head
100 liters per min 1.66 liters per second @ 102m head
0 liters per min 0.00 liters per second @ 120m head
This 4S260-19 has a 4kw / 5.5hp 3 Phase Franklin Electric motor.
The 3 phase motor does require a contactor / starter box which must be purchased separately.
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this pump
Bore Caps are available with different size discharge threads. Your pipe and adaptor size is what will determine what size discharge thread it will need to connect with. Please keep this in mind when selecting your bore cap.
The splice kit is used to join the motor cable to the electrical drop cable. The splice kit makes a waterproof join.
A pump shroud is needed to cool the motor and is only required if you are installing a 4″ pump down 6″ or larger casing.
3 Phase Cable 3-wire/4 core submersible drop cable is required. However, you must check with your electrician on cable size. He will do volt drop calculations to meet site requirements to comply with AS.
Stainless Steel Support Cable – Available in 3mm cable or 4mm cable.
Stainless Steel Support Cable Grips/Clamps – Available in 3mm or 4mm to suit S/S Cable.
Pressure Gauges Liquid Filled 63mm – Available in 0-800kPa, 0-1000kPa, 0-1600kPa & 0-2500kPa pressure ratings.
Flexible Riser Pipe
– Series 100 is for depths up to 100.The sizes are 32mm and 50mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
– As well as the couplings, ties and joiners.
The installation roller is a device that fits on the top of the bore casing. The rollers make it easy to lift and lower the bore pump down the borehole.
Three Phase Contactor / Starter
If your electrician does not provide this for you, a 3 phase contactor is needed. Please make sure you select the correct kw rated contactor as the motor.
|Motor Size||4kw / 5.5hp|
|Phase||Three 3 Phase|
|Rated Flow (LPM)||240|
|Discharge (mm)||50mm - 2"|
|Warranty Period||2 Years|