21 liters per min 0.35 liters per second @44m head
30 liters per min 0.5 liters per second @ 38m head
36 liters per min 0.6 liters per second @ 31m head
39 liters per min 0.65 liters per second @ 28m head
42 liters per min 0.7 liters per second @ 24m head
This bore pump has a 0.37kw/0.5hp 3w-PSC 1 phase motor.
The 3w-PSC 1 phase motor requires a starter box which comes standard with this model.
PSC motors have a lower starting current, so are the preferred motor when powered by a generator or solar.
There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below and are available under our ACCESSORIES > BORE PUMP ACCESSORIES Category.
Options to purchase with your kit to suit this pump
The splice kit is used to join the motor cable to the electrical drop cable. The splice kit makes a waterproof join. You will receive a FREE SPLICE KIT with this pump.
Bore Caps have different size discharge threads. Please keep this in mind when purchasing your bore cap.
A pump shroud is only needed if you are installing a 4″ pump down 6″ or larger casing. They are needed for motor cooling.
The info below is a guide only, you must check with your electrician on cable size.
1 Phase Cable (3-wire/4 core):
- 1.5mm sq cable up to 120m
- 2.5mm sq cable up to 210m
- 4mm sq cable up to 330m
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.
Stainless Steel Support Cable – Available in 3mm cable or 4mm cable
Stainless Steel Support Cable Grips/Clamps – Available in 3mm or 4mm to suit S/S Cable
Pressure Gauges Liquid Filled 63mm – Available here under ‘Accessories’
Flexible Riser Pipe
– Series 100 is for depths up to 100.The sizes are 32mm and 50mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
– As well as the coupling, ties & joiners.
The installation roller fits on the top of the bore casing making it easy to lift and lower the bore pump down the borehole.
Bore pump wet ends are universal which means they can be fitted to other brand 4″ motor. If you would like a Franklin Motor instead of a Wilo, just ask and we can arrange this for you.
Wilo pumps are German made and are identical to the Grundfos. We have a Grundfos / Wilo comparison chart available upon request.
|Motor Size||0.37kw / 0.5hp|
|Phase||Single 1 Phase 3w-PSC|
|Rated Flow (LPM)||30|
|Discharge (mm)||32mm - 1.25"|
|Warranty Period||2 Years|