45LPM = 0.75LPS at 69m head Bore Pump ME4BP-12-1-1-1

45LPM = 0.75LPS at 69m head Bore Pump ME4BP-12-1-1-1

70LPM = 1.16LPS at 27m head Borehole Pump with Franklin Motor

70LPM = 1.16LPS at 27m head Borehole Pump with Franklin Motor

90LPM = 1.5LPS at 57m head Bore Pump ME4BP-11-2-1

2hp OEM Bore Pump rated at 1.5 LPS or 90 LPM at 57m head
A$900.00
In stock
SKU
5375

Buy 2hp Bore Pump, Motor and Starter assembly.

Assembly includes 4″ submersible pump, motor & starter only.

85 liters per min / 1.4 liters per second @ 60m head
95 liters per min /1.58 liters per second @ 54m head
100 liters per min / 1.66 liters per second @ 50m head
107 liters per min / 1.78 liters per second @ 42m head
112 liters per min / 1.86 liters per second @ 38m head

This model has a 1.5kw/2hp 3-wire (4-core) single 1 phase motor.

The (optional) Automatic Control Box can be purchased separately.  As with the starter box, the Automatic Control Box contains the circuit breaker and capacitor.  However, it has the added feature of ‘water level monitoring’ probes.  These probes are installed down the bore with the pump and are wired into the control box. If there is not enough water, the system will shut down until the water level in the bore recovers and will allow the system to restart when the water level in the bore recovers. Handy if you don’t know the flow of the bore or have a low yielding bore.

There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.

Options to purchase with your kit to suit this pump

Bore Cap
This model has a 1.5″ (40mm) discharge thread, so if you are using 40mm pipe diameter then a 1.5” bore cap would be recommended.

Shroud Adapter
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 32mm pipe diameter then a 32 x 100mm (1 1/4″ riser) PVC Shroud Adapter would be recommended.

Electrical Cable
The info below is a guide only, you must check with your electrician on cable size.
3-wire/4 core:

  • 2.5mm sq cable up to 36m
  • 4mm sq cable up to 60m
  • 6mm sq cable up to 90m
  • 10mm sq cable up to 145m
  • 16mm sq cable up to 230m


Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.

Stainless Steel Support Cable – Available in 3mm cable or 4mm cable

Stainless Steel Support Cable Grips/Clamps – Available in 3mm or 4mm to suit S/S Cable

Pressure Gauges Liquid Filled 63mm – Available in 0-800kPa, 0-1000kPa, 0-1600kPa and 0-2500kPa

Flexible Riser Pipe
– Series 100 is for depths up to 100. The sizes are 32mm and 50mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
– As well as the couplings, ties and joiners.

Installation Roller

The installation roller fits on the top of the bore casing making it easy to lift and lower the bore pump down the borehole.

More Information
Motor Size 1.5kw / 2hp
Phase Single 1 Phase 3-wire
Rated Flow (LPM) 90
Size 4" Inch
Discharge (mm) 40mm - 1.5"
Brand OEM
Warranty Period 1 Year
Write Your Own Review
You're reviewing:90LPM = 1.5LPS at 57m head Bore Pump ME4BP-11-2-1

No Related Posts

Products from the same brand