45LPM = 0.75LPS at 90m head OEM Bore Pump ME4BP-16-1-5-1

45LPM = 0.75LPS at 90m head OEM Bore Pump ME4BP-16-1-5-1

90LPM = 1.5LPS at 92m head OEM Bore Pump ME4BP-18-3-3

90LPM = 1.5LPS at 92m head OEM Bore Pump ME4BP-18-3-3

90LPM = 1.5LPS at 92m head OEM Bore Pump ME4BP-18-3-1

3hp 1.5 liter per second 90LPM Submersible Bore Pump
In stock

Buy 3hp Bore Pump, Motor and Starter assembly.

Assembly includes 4″ submersible pump, motor & starter only (Automatic Control Box is an optional extra).

85 liters per min / 1.4 liters per second @ 100m head
95 liters per min /1.58 liters per second @ 85m head
100 liters per min / 1.66 liters per second @ 80m head
107 liters per min / 1.78 liters per second @ 70m head
112 liters per min / 1.86 liters per second @ 60m head

This model has a 2.2kw/3hp 3-wire (4-core) single 1 phase motor.

The (optional) Automatic Control Box can be purchased separately.  As with the starter box, the Automatic Control Box contains the circuit breaker and capacitor.  However, it has the added feature of ‘water level monitoring’ probes.  These probes are installed down the bore with the pump and are wired into the control box. If there is not enough water, the system will shut down until the water level in the bore recovers and will allow the system to restart when the water level in the bore recovers. Handy if you don’t know the flow of the bore or have a low yielding bore.

There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.

Options to purchase with your kit to suit this pump

Bore Cap
This model has a 1.5″ (40mm) discharge thread, so if you are using 40mm pipe diameter then a 1.5” bore cap would be recommended.

Shroud Adapter
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 32mm pipe diameter then a 32 x 100mm (1 1/4″ riser) PVC Shroud Adapter would be recommended.

Electrical Cable
The info below is a guide only, you must check with your electrician on cable size.
3-wire/4 core:

  • 2.5mm sq cable up to 25m
  • 4mm sq cable up to 40m
  • 6mm sq cable up to 60m
  • 10mm sq cable up to 100m
  • 16mm sq cable up to 165m

Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.

Stainless Steel Support Cable – Available in 3mm cable or 4mm cable.

Stainless Steel Support Cable Grips/Clamps – Available in 3mm or 4mm to suit S/S Cable

Pressure Gauges Liquid Filled 63mm – Available in 0-800kPa, 0-1000kPa, 0-1600kPa and 0-2500kPa.

Flexible Riser Pipe
– Series 100 is for depths up to 100. The sizes are 32mm and 50mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
– As well as the couplings, ties and joiners.

Installation Roller

The installation roller fits on the top of the bore casing making it easy to lift and lower the bore pump down the borehole.

More Information
Motor Size 2.2kw / 3hp
Phase Single 1 Phase 3-wire
Rated Flow (LPM) 90
Size 4" Inch
Discharge (mm) 40mm - 1.5"
Brand OEM
Warranty Period 1 Year
Write Your Own Review
You're reviewing:90LPM = 1.5LPS at 92m head OEM Bore Pump ME4BP-18-3-1

No Related Posts

Products from the same brand