90LPM = 1.5LPS at 92m head OEM Bore Pump ME4BP-18-3-1

90LPM = 1.5LPS at 92m head OEM Bore Pump ME4BP-18-3-1

200LPM = 3.3LPS at 35m head OEM Bore Pump ME4BP-10-3-1

200LPM = 3.3LPS at 35m head OEM Bore Pump ME4BP-10-3-1

90LPM = 1.5LPS at 92m head OEM Bore Pump ME4BP-18-3-3

3hp 3 phase Bore Pump rated at 1.5 LPS or 90 LPM at 92m head
In stock

OEM 4″ 3hp Submersible Pump, Motor and Starter assembly.

Assembly includes pump, motor & automatic control box.

85 liters per min / 1.4 liters per second @ 100m head
95 liters per min /1.58 liters per second @ 85m head
100 liters per min / 1.66 liters per second @ 80m head
107 liters per min / 1.78 liters per second @ 70m head
112 liters per min / 1.86 liters per second @ 60m head

This model has a 2.2kw/3hp three 3 phase motor.

The Automatic Control Box comes standard with the 3 Phase model.  It has the feature of ‘water level monitoring’ probes.  These probes are installed down the bore with the pump and are wired into the control box. If there is not enough water, the system will shut down until the water level in the bore recovers and will allow the system to restart when the water level in the bore recovers. Handy if you don’t know the flow of the bore or have a low yielding bore. 

There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.

Options to purchase with your kit to suit this pump

Bore Cap
This model has a 1.5″ (40mm) discharge thread, so if you are using 40mm pipe diameter then a 1.5” bore cap would be recommended.

Shroud Adapter
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 32mm pipe diameter then a 32 x 100mm (1 1/4″ riser) PVC Shroud Adapter would be recommended.

Electrical Cable
The info below is a guide only, you must check with your electrician on cable size.
3 phase/4 core:

  • 1.5mm sq cable up to 100m
  • 2.5mm sq cable up to 165m
  • 4mm sq cable up to 255m
  • 6mm sq cable up to 390m

Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.

Stainless Steel Support Cable – Available in 3mm cable or 4mm cable.

Stainless Steel Support Cable Grips/Clamps – Available in 3mm or 4mm to suit S/S Cable

Pressure Gauges Liquid Filled 63mm – Available in 0-800kPa, 0-1000kPa, 0-1600kPa and 0-2500kPa

Flexible Riser Pipe
– Series 100 is for depths up to 100. The sizes are 32mm and 50mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
– As well as the couplings, ties and joiners.

Installation Roller

The installation roller fits on the top of the bore casing making it easy to lift and lower the bore pump down the borehole.

More Information
Motor Size 2.2kw / 3hp
Phase Three 3 Phase
Rated Flow (LPM) 90
Size 4" Inch
Discharge (mm) 40mm - 1.5"
Brand OEM
Warranty Period 1 Year
Write Your Own Review
You're reviewing:90LPM = 1.5LPS at 92m head OEM Bore Pump ME4BP-18-3-3

No Related Posts

Products from the same brand