Franklin Electric

Franklin Electric Bore Pumps

Franklin Electric Bore Pumps

Franklin Electric submersible bore pumps are top of the range, quality bore pumps.

Franklin have been selling submersible motors in Australia for over 50 years.  If you were to pull up a bore pump in an old bore or well, chances are it will have a Franklin motor. Franklin Electric was founded in 1944 in the USA.  

The Franklin range of 4" submersible bore pumps have a floating impeller system which protects the pump against damage from grit and sand.

The Strongman Pumps website currently only displays the 4″ bore pumps, however, we also sell 6″, 8″, 12″, 14″ and 16″ submersible bore pumps.  Please contact me for the larger bore pumps.

Our range of 4″ inch bore pumps are displayed by FLOW RATING in Litres Per Minute (LPM).  The flow for each model will vary depending on the head that it is pumping.

The 4” Franklin Electric Submersible Bore Pump Models are available in 2-wire & 3-wire single phase and 3 Phase.

Get your FREE 4" SPLICE KIT when you purchase a Franklin Electric bore pump from Strongman Pumps.

VIEW FRANKLIN FLOW CURVES HERE

Single Phase Bore Pumps

single phase franklin electric submersible bore pump

VIEW PRODUCT

Three Phase Bore Pumps

three phase franklin electric submersible bore pump

VIEW PRODUCT

Single 1 Phase Franklin Electric Bore Pumps

The Franklin Electric single phase bore pumps come standard with Franklin Electric motors.  On the website they are available in standard 3-wire and 2-wire.  However, if you would like your Franklin pump coupled with a 3W-PSC motor, please let me know and I can arrange this for you.

1 phase 2-wire (3-core) 4" Inch bore pumps have a biac switch in the motor. The Franklin 2-wire motor is designed for direct connection to the single-phase power supply with no need for a starter box. The advantages of this motor design is the ease of installation along with the unique ‘reverse impact torque’. 

1 phase 3-wire (4-core) 4” Inch bore pumps need a start capacitor which are in the starter boxes which will come with the pump when ordered. These starter boxes also contain the circuit breaker which will trip the motor is it gets hot to protect the life of the motor.

Three 3 Phase Franklin Electric Bore Pumps

Three 3 Phase Franklin bore pumps operate on three phase power.

A 3 phase starter contactor in the correct size to match the motor is available as an option to be purchased at the shopping cart if needed.

More Information about Franklin Bore Pumps

The Franklin Bore Pumps are exceptionally high quality pumps and come with Franklins 3 year warranty.

All the Franklin 4″ inch bore pumps are suitable for 4″ inch casing or larger.

They have a floating impeller system which is good if the water is not absolutely clean.

If you have an existing motor, the Franklin pump ends can be purchased without the motors.  Please contact me for the wet ends only.

NEED HELP Selecting a Bore Pump?

Fill in the obligation free quote form or just contact me and I will be more than happy to assist you with your pump selection or inquiry.

LATEST BLOG POSTS