1hp Household Pressure Pump with Pressure Controller
Pentax INOX100C Household Pressure Pump
The Pentax INOX 100 Pressure pumps can be used with the Automatic Pump Control or a pressure switch with a pressure tank. Both systems will automatically switch the the pump off in the absence of water, so the pump won’t burn out.
36LPM @ 30m head
Max flow = 55LPM
Max head = 46m
Max suction lift = 7m
Inlet / Outlet size is 1 ”
2 Year Warranty
To avoid fluctuating pressures, you can use the FCP Variable Speed Pump Controller or the Inline Constant Pressure System.
If your water tank is at a distance from the house, the pump is higher than the water source or the pipe from the tank to the pump has a lot of bends or elbows, ‘SELF-PRIMING’ pressure pumps can be useful.
If you want to suck water up from a well, please ensure you have a good quality foot valve at the suction end and the pipes have no leaks. The pipe must come up directly to a 90 degree elbow attached to the suction end of the pump. Make sure there are no air leaks and keep the prime in the pump. Have a tap near the pump to check it works.
Every meter of suction (underground tank, etc) = a loss of 5% pump flow performance. Eg: A pump that can do 50LPM, if drawing water up from 4m will loose approx 20% so will only pump 40LPM.
The first in the Pentax range that offers a stainless pump casing with corrosion resistant impellor and diffuser made of Noryl.
|Number of Taps||3 to 5|
|Rated Flow (Liters Per Minute)||35|
|Rated Head (m)||30|
|Maximum Flow (LPM - Litres Per Minute)||50 to 60|
|Maximum Head (m)||45 to 50|
|Auto / Manual||Automatic|
|Outlet Size (mm)||25mm|
|Motor Size||0.75kw / 1hp|
|Phase||Single 1 Phase|
|Warranty Period||2 Years|