10hp Three 3 Phase. Max Flow = 350LPM @ 65m head. Best performance = 300LPM @ 84m head
OEM 4″ 10hp Submersible Pump, Motor and Starter assembly.
Assembly includes pump, motor & control box.
170 liters per min / 2.8 liters per second @ 122m head
200 liters per min /3.3 liters per second @ 114m head
250 liters per min /4 liters per second @ 99m head
300 liters per min / 5 liters per second @ 84m head
350 liters per min / 5.8 liters per second @ 65m head
This model has a 7.5kw/10hp three 3 phase motor.
The Automatic Control Box comes standard with the 3 Phase model. It has the popular feature of ‘water level monitoring’ probes. These probes are installed down the bore with the pump and are wired into the control box. If there is not enough water, the system will shut down until the water level in the bore recovers and will allow the system to restart when the water level in the bore recovers. Handy if you don’t know the flow of the bore or have a low yielding bore. Contact Us to find out more about the Auto Control Box.
There are other accessories that you will need to install your 10hp bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this 10hp bore pump
This model has a 2″ (50mm) discharge thread, so if you are using 40mm pipe diameter then a 2″ Bore Cap would be recommended.
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 50mm pipe diameter then a 50 x 100mm (2″ riser) PVC Shroud Adapter would be recommended.
The info below is a guide only, you must check with your electrician on cable size.
3 phase/4 core – 4mm sq cable up to 80m. 6mm sq cable up to 130m.
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.
Flexible Riser Pipe
– Series 100 is for depths up to 100. The sizes are 32 mm and 50 mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
– As well as the Couplings, ties, joiners and installation roller.
1 Year Warranty
7.5 / 10
4hp/3kw - Three 3 Phase. Max Flow = 180LPM @ 48m head. Min Flow…
3hp/2.2kw - Three 3 Phase. Max Flow = 180LPM @ 30m head. Min Flow…
1.5hp/1.1kw - Single 1 Phase 3w-PSC. Max Flow = 180LPM @ 18m head. Min Flow…
1hp/0.75kw - Single 1 Phase 2-wire. Max Flow = 180LPM @ 11m head. Min Flow…