2hp/1.5kw Single 1 Phase 3w-PSC. Max Flow = 42LPM @ 75m head. Min Flow = 21LPM @ 140m head
Wilo 4″Bore Pump and Motor assembly.
Equivalent to Grundfos SP 2A 28
Assembly includes pump, motor & starter box.
21 liters per min 0.35 liters per second @ 140m head
30 liters per min 0.5 liters per second @ 120m head
36 liters per min 0.6 liters per second @ 100m head
39 liters per min 0.65 liters per second @ 89m head
42 liters per min 0.7 liters per second @ 75m head
This bore pump has a 1.5kw/2hp 3w-PSC 1 phase motor.
The 3w-PSC 1 phase motor requires a starter box which comes standard with this model.
PSC motors have a lower starting current, so are the preferred motor when powered by a generator or solar.
There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this pump
This model has a 1 1/4 (32mm) discharge thread, so if you are using 32mm pipe diameter then a 1.25″ Bore Cap would be recommended.
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 32mm pipe diameter then a 32 x 100mm (1 1/4″ riser) PVC Shroud Adaptor would be recommended.
The info below is a guide only, you must check with your electrician on cable size.
1 Phase Cable (3-wire/4 core) – 1.5mm sq cable up to 30m, 2.5mm sq cable up to 60m, 4mm sq cable up to 100m
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.
Flexible Riser Pipe
– Series 100 is for depths up to 100.The sizes are 32 mm and 50 mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
– As well as the Couplings, ties, joiners and installation roller.
2 year Warranty
Bore pump wet ends are universal which means they can be fitted to other brand 4″ motor. If you would like a Franklin Motor instead of a Wilo, just ask and we can arrange this for you.
Wilo pumps are German made and are identical to the Grundfos. We have a Grundfos / Wilo comparison chart available upon request.
1.5 / 2
3hp/2.2kw - Three 3 Phase. Max Flow = 300LPM @ 21m head. Min Flow =…
3hp/2.2kw - Single 1 Phase 3w-PSC. Max Flow = 180LPM @ 30m head. Min Flow…
1.5hp/1.1kw - Three 3 Phase. Max Flow = 180LPM @ 18m head. Min Flow…
1hp/0.75kw - Single 1 Phase 2-wire. Max Flow = 180LPM @ 11m head. Min Flow…