1.5hp Single 1 Phase 3-wire. Max Flow = 56LPM @ 67m head. Best performance = 45LPM @ 90m head
Buy 1.5hp Bore Pump, Motor and Starter assembly.
Assembly includes 4″submersible pump, motor & starter only.
2.5m³/h flow ratings
34 liters per min / 0.56 liters per second @ 110m head
42 liters per min / 0.7 liters per second @ 94m head
47 liters per min / 0.78 liters per second @ 88m head
52 liters per min / 0.86liters per second @ 77m head
56 liters per min / 0.93 liters per second @ 67m head
This model has a 1.1kw/1.5hp 3-wire (4-core) single 1 phase motor.
The (optional) Automatic Control Box can be purchased separately. As with the starter box, the Automatic Control Box contains the circuit breaker and capacitor. However, it has the added feature of ‘water level monitoring’ probes. These probes are installed down the bore with the pump and are wired into the control box. If there is not enough water, the system will shut down until the water level in the bore recovers and will allow the system to restart when the water level in the bore recovers. Handy if you don’t know the flow of the bore or have a low yielding bore. Contact Us to find out more about the Auto Control Box.
There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this pump
This model has a 1 1/4 (32mm) discharge thread, so if you are using 32mm pipe diameter then a 1.25″ Bore Cap would be recommended.
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 32mm pipe diameter then a 32 x 100mm (1 1/4″ riser) PVC Shroud Adapter would be recommended.
The info below is a guide only, you must check with your electrician on cable size.
3-wire/4 core – 1.5mm sq cable up to 30m. 2.5mm sq cable up to 50m. 4mm sq cable up to 75m. 6mm sq cable up to 115m
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.
Flexible Riser Pipe
– Series 100 is for depths up to 100. The sizes are 32 mm and 50 mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
– As well as the Couplings, ties, joiners and installation roller.
1 Year Warranty
1.1 / 1.5
5.5hp/4kw - Three 3 Phase. Max Flow = 300LPM @ 37m head. Min Flow…
4hp/3kw - Three 3 Phase. Max Flow = 300LPM @ 29m head. Min Flow…
3hp/2.2kw - Three 3 Phase. Max Flow = 180LPM @ 30m head. Min Flow…
0.75hp/0.55kw Single 1 Phase 2-wire. Max Flow = 80LPM @ 22m head. Min Flow =…