1″ BSP inlet – Max Pressure is 16 bar = 1600 kPa. Pressure Setting is 2.2 Bar. Reduces cycling which extends the pump life.
The 60 litre vertical 16 bar pressure tank absorbs water pressure by utilizing pre-charge compressed air / bladder arrangement. Because of this stored pressure, when a valve or tap is opened water is pushed out of the tank through the plumbing system. When the water in the pressures tank drops below the pre-charged value, the pressure switch is activated turning on the pump. The pump then refills the pressure tank. The combination of the pressure tank, pressure switch and the pump is what allows water to flow through your home or garden.
60 litre vertical 16 bar pressure tank has a maximum pressure of 16 bar which is 1600kPa. it has a pressure setting of 2.2 Bar. A 60L pressure tank is usually used in larger pressure systems. Any standard domestic applications benefit from the inclusion of a pressure tank.
REEFE® pressure tanks are manufactured with a pure Polypropylene liner. These are coupled with a high-grade Butyl diaphragm which is held against the wall of a tank with a special steel ring. The brass air valve is sealed by a threaded O-ring valve cap to prevent air leaks. The threaded water connection fitting is stainless steel to avoid corrosion, and provides a unique water/air seal preventing leaks.
The diaphragm and the liner are both reinforced in expected areas of wear, for longer life. There are no wetted steel parts to avoid corrosion. All the internal parts including the air valve are smooth to prevent damage to the diaphragm. The steel tank exterior is coated with a two-pack polyurethane paint finish over an epoxy undercoating. This provides excellent long-term UV and corrosion protection.
5 Year Warranty
1" BSP inlet – Max Pressure is 10 bar = 1000 kPa. – 54 Litre…
Straps to suit Series 250 Flexibore 127mm (5″) Flexible Hose System Fit 1 strap to…