30LPM @ 21m head. Max Suction Depth = 35m
The Convertible Deep Well Jet Pump is designed for lifting water well beyond the reach of conventional surface water pressure pumps. Convertible jet pumps are generally used in wells or bores where pumping levels can range from 10 to 50m. Supplied complete with plastic fittings, all that is needed are the twin pipes that to go down to the water source.
All EDW pumps come with a P30 Injector Kit. However they are also available with a P20 Injector Kit on request.
Surface Bore Pumps are designed to sit at the top of the bore or well. They have 2 pipes attached with a venturi at the bottom. One pipe pushes water down to the venturi (with injectors) which forces water up the other pipe to the surface which is why these pumps need to be primed at all times. So a good quality foot valve is very important.
The Convertible Deep Well Jet Pump and can be set up to supply the whole house from a bore or well.
If you can match the flow of the bore to the output of the pump you could run the Convertible Jet Pump all day, every day, without any problems of it running dry.
These Self Priming Pumps have 3 three different injector options available, their design enables easy installation either above the bore or away from the job.
While the smallest of these is suitable for small domestic application, the larger are suitable for a multitude of water moving applications from tank filling to domestic water supply.
Exceptional Quality, Heavy Duty, European manufactured High demand, self-priming centrifugal pump with external injector; for water supply in household and rural systems. Available with Pressure Switch and Tank.
Pump Control Options
Click this link to view this model of deep well jet pump without any pressure switch or tank
Click this link to view this model of deep well jet pump with a pressure switch and pressure tank
They must not be subjected to more than 30 starts per hour at regular intervals.
The convertible deep well jet pump is a clean water pump consisting of pump, mechanical seal and single-phase asynchronous motor. The ejector is lowered in a well and connected to the pump body by two pipes for suction of water from the well or bore.
If you intend to make it automatic, the Deep Well Jet Pump are best suited set up as a pressure system and you would have more control over the settings VIA the pressure switch that is on the pump.
35LPM @ 46m head. Max Suction Depth = 50m
30LPM @ 42m head. Max Suction Depth = 50m