Items : 0
Subtotal : $0.00
View CartCheck Out
Online sales of Water Pumps Get in touch with a friendly technician

Call us Now
047 789 9942

Items : 0
Subtotal : $0.00
View CartCheck Out

Deep Well Jet Pumps – Self Priming EDW100 Bare


30LPM @ 21m head.   Max Suction Depth = 35m

Additional information

Surface Bore Pumps / Convertible Deep Well Jet Pumps

Deep Well Jet Pumps are a surface bore pump or underground rainwater tank pump which is designed to sit at the top of the bore, well or tank. They have 2 pipes attached with a venturi at the bottom. One pipe pushes water down to the venturi (with injectors) which forces water up the other pipe to the surface which is why these pumps need to be primed at all times. So a good quality foot valve is very important.

  • EDW100 Self Priming Pump with P30 Injector
  • Maximum Suction Lift is 35m
  • Maximum Without Suction is 60m

Deep Well Jet Pumps for the home

The Convertible Deep Well Jet Pump and can be set up to supply the whole house from a bore or well.
If you can match the flow of the bore to the output of the pump you could run the Convertible Jet Pump all day, every day, without any problems of it running dry.

Convertible Deep Well pumps are designed for lifting water well beyond the reach of conventional surface water pressure pumps. Convertible jet pumps are generally used in wells or bores where pumping levels can range from 10 to 50m. Supplied complete with plastic fittings, all that is needed are the twin pipes that to go down to the water source.

These Self Priming Pumps have 3 three different injector options available, their design enables easy installation either above the bore or away from the job.

While the smallest of these is suitable for small domestic application, the larger are suitable for a multitude of water moving applications from tank filling to domestic water supply.

Exceptional Quality, Heavy Duty, European manufactured High demand, self-priming centrifugal pump with external injector; for water supply in household and rural systems. Available with Pressure Switch and Tank.


  •      Deep Wells up to 50m in depth (varies depending on model and injector kit)
  •      Long Suction Lines from tank to pump
  •      Draw from Dams, Creeks, Rivers
  •      Irrigation, Tank Filling or Transferring


  • Injector kits supplied with each pump
  • Overload Protection
  • Liquid temperature range 0-50°C; max

Pump Control Options

  • REEFE® Pressure Controller
  • REEFE® Pressure Switch and Tank

Click on this link to view this model – deep well jet pump with a pressure controller

Click on this link to view this model – deep well jet pump with a pressure switch and tank



  • Heavy Duty Cast iron pump casing with threaded inlet and outlet
  • Twin Noryl Impeller, Noryl Diffuser
  • Ceramic-graphite mechanical seal
  • Motor shaft in Gr 316 Stainless steel EDW100 and Gr 303
  • Stainless steel on the hydraulic side on EDW150 and EDW200
  • World leading brand ball bearings


  • 2 pole electric induction motor for continuous operations
  • Stator made with low-loss laminated electric sheet steel
  • Insulation Class F, IP44 & Thermal protection

They must not be subjected to more than 30 starts per hour at regular intervals.

Convertible deep well jet pumps are a clean water pump consisting of pump, mechanical seal and single-phase asynchronous motor. The ejector is lowered in a well and connected to the pump body by two pipes for suction of water from the well or bore.

All pumps on this page come with a P30 Injector Kit.  However they are also available with a P20 Injector Kit on request.

If you intend to make it automatic, the Deep Well Jet Pump are best suited set up as a pressure system and you would have more control over the settings VIA the pressure switch that is on the pump.












2 Years



Rated Flow (LPM)