5hp/3.7kw – Single 1 Phase 3-wire. Max Flow = 124LPM @ 94m head. Min Flow = 64LPM @ 172m head
Assembly includes pump, motor and 1 Phase starter box.
4400 Tri-Seal 4-Inch Bore Pump and Motor Kit.
6m³/h flow ratings
100 liters per min 1.6 liters per second @ 132m head
The FPS-6A-34TS has a 3.7kw/5hp 3-wire 1 phase motor.
The 3-wire 1 phase require a starter box which comes standard when you buy this combination.
Receive a FREE 4″ Splice Kit with every Franklin Bore Pump and Motor Combination.
Receive a FREE External 2″ BSP Check Valve
There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below.
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this pump
This model has a 2″ (50mm) discharge thread, so if you are using 50mm pipe diameter then a 2″ Bore Cap would be recommended. If you are using a 1.5″(40mm) pipe diameter then a 1.5″ Bore Cap would be recommended.
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 50mm pipe diameter then a 50 x 100mm (2″ riser) PVC Shroud Adapter would be recommended.
The info below is a guide only, you must check with your electrician on cable size.
1 Phase Cable (3-wire/4 core) – 4mm sq cable up to 40m, 6mm sq cable up to 60m, 10mm sq cable up to 110m, 16mm sq cable up to 170m
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.
Flexible Riser Pipe
– Series 100 is for depths up to 100. The sizes are 32 mm and 50 mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm, 50mm, 76mm, 102mm, 127mm, 152mm & 200mm internal diameter.
– As well as the Couplings, ties, joiners and installation roller.
Single 1 Phase Motor Protection
If you purchase a single phase 3-wire kit, then you will need a Pumptec Plus as your motor protection device.
3 Year Warranty
3.7 / 5
3-wire 1 phase
12.4hp/9.3kw 6 Inch Motor - Max Flow = 900LPM @ 47m head. Min Flow =…
1hp/0.75kw Single 1 Phase 2-wire. Max Flow = 160LPM @ 18m head. Min Flow =…
0.5hp Single 1 Phase 3-wire. Max Flow = 40LPM @ 28m head. Best performance =…
1.5hp/1.1kw - Single 1 Phase 3-wire. Max Flow = 340LPM @ 6m head. Min Flow…