FPS6A-09 3-wire 1 Phase Franklin Electric 4 Inch Submersible Pump and Motor Assembly

Assembly includes pump, motor & starter box.

4400 Tri-Seal 4-Inch Bore Pump and Motor Kit.
6m³/h flow ratings
100 liters per min / 1.6 liters per second @ 48m head

The FPS-6A-09TS has a 1.1kw/1.5hp 3-wire 1 phase motor.
The 3-wire 1 phase require a starter box which comes standard when you buy this combination.

Receive a FREE 4″ Splice Kit with every Franklin Bore Pump and Motor Combination.

Receive a FREE External 2″ BSP Check Valve

There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable,  pressure gauge, etc. These are listed below.

Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.

Options to purchase with your kit to suit this pump

Bore Cap
This model has a 2″ (50mm) discharge thread, so if you are using 50mm pipe diameter then a 2″ Bore Cap would be recommended. If you are using a 1.5″(40mm) pipe diameter then a 1.5″ Bore Cap would be recommended.

Shroud Adapter
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 50mm pipe diameter then a 50 x 100mm (2″ riser) PVC Shroud Adapter would be recommended.

Electrical Cable
The info below is a guide only, you must check with your electrician on cable size.
1 Phase Cable (3-wire/4 core) – 1.5mm sq cable up to 40m, 2.5mm sq cable up to 70m, 4mm sq cable up to 120m, 6mm sq cable up to 190m
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.

Stainless Steel Support Cable – Available in 3mm cable or 4mm cable

Stainless Steel Support Cable Grips/Clamps – Available in 3mm or 4mm to suit S/S Cable

Pressure Gauges Liquid Filled 63mm – Available in 0-800 kPa, 0-1000 kPa, 0-1600 kPa and 0-2500 kPa

Single 1 Phase Motor Protection
If you purchase a single phase 2-wire or 3-wire kit, then you will need a Pumptec as your motor protection device.

3 Years Warranty