2hp/1.5kw Three 3 Phase. Max Flow = 24LPM @ 133m head. Min Flow = 11LPM @ 255m head
Assembly includes pump and motor only.
4400 Tri-Seal 4-Inch Bore Pump and Motor Kit.
1 m³/h flow ratings
18 liters per min / 0.3 liters per second @ 205m head
This FPS-1A-35TS has a 1.5kw/2hp 3 phase motor.
The 3 phase will require a 3 phase contactor/starter which will need to be ordered separately.
Receive a FREE 4″ Splice Kit with every Franklin Bore Pump and Motor Combination.
There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this pump
This model has a 1 1/4 (32mm) discharge thread, so if you are using 32mm pipe diameter then a 1.25″ Bore Cap would be recommended.
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 32mm pipe diameter then a 32 x 100mm (1 1/4″ riser) PVC Shroud Adapter would be recommended.
The info below is a guide only, you must check with your electrician on cable size.
3 Phase Cable (3-wire/4 core) – 1.5mm sq cable up to 30m
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.
3 Phase Contactor
The correct size contactor for this model is a 1.5kw/2hp contactor
Three 3 Phase Motor Protection
If you purchase a 3 Three phase kit, then you will need a Submonitor as your motor protection device.
3 Year Warranty
1.5 / 2
|Rated Flow (LPM)||
3hp Three 3 Phase. Max Flow = 350LPM @ 18m head. Best performance = 300LPM…
0.5hp Single 1 Phase 3-wire. Max Flow = 40LPM @ 28m head. Best performance =…
2hp/1.5kw - Three 3 Phase. Max Flow = 340LPM @ 15m head. Min Flow =…