1 Litre Pressure Accumulator Tank

IMPROVES MOST AUTOMATIC WATER PRESSURE SYSTEMS This Accumulator Tank is intended for installation in any pumped water system controlled by a pressure switch. For example, PAR-MAX™ 3 or any Jabsco pressure pumps as found in boats, RV’s, motor caravans, coaches and similar applications.

Accumulator tanks improve the performance and lengthen the pump life in most pressurised water systems. The accumulator tank holds a store of pressurised water to decrease pump cycling, pulsation and water hammer to give smoother, quieter water flow. Can be fitted to new or existing pump system installations.

Pressurised 1 Litre Tank Our most popular accumulator tank. Non-corrosive nylon outer casing. Pressurised tank with internal rubber membrane eliminates maintenance and allows universal mounting.

Dimensions: 340 x 120 x 110mm.

Supplied with integral mount bracket and straight snap-in port kits for 12mm I.D hose.

Accumulator tanks hold a reservoir of air and water down stream from the pump. The air acts as a cushion, absorbing pump and pressure fluctuations, smoothing the flow and making the system quieter. Accumulators allow the pump to reach shut-off pressure more smoothly which reduces the on/off cycle which gives better control of hot water delivery.

Our accumulator tanks all have a bladder that separates water from air. The bladder is pre-pressurised but may need fine tuning when installed to give the most efficient performance. One of the advantages of an accumulator tank is that they can dispense up to half of their capacity of water even when the pump is switched off. So the bigger the reservoir, the more water you have available without having to switch the pump on helping you wash your hands or clean your teeth without noise.

Seek professional marine plumbing advice before installing.