Call us Now
047 789 9942
$5,205.00
5hp/3.7kw – Single 1 Phase 3-wire. Max Flow = 210LPM @ 62m head. Min Flow = 110LPM @ 102m head
Assembly includes pump and motor and 1 Phase starter box.
4400 Tri-Seal 4-Inch Bore Pump and Motor Kit.
12m³/h flow ratings
200 liters per min / 3.3 liters per second @ 67m head
The FPS-12A-23TS has a 3.7kw/5hp 3-wire 1 phase motor.
The 3-wire 1 phase require a starter box which comes standard when you buy this combination.
Receive a FREE 4″ Splice Kit with every Franklin Bore Pump and Motor Combination.
Receive a FREE External 2″ BSP Check Valve
There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, pressure gauge, etc. These are listed below.
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this pump
Bore Cap
This model has a 2″ (50mm) discharge thread, so if you are using 50mm pipe diameter then a 2″ Bore Cap would be recommended. If you are using a 1.5″(40mm) pipe diameter then a 1.5″ Bore Cap would be recommended.
Shroud Adapter
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 50mm pipe diameter then a 50 x 100mm (2″ riser) PVC Shroud Adapter would be recommended.
Electrical Cable
The info below is a guide only, you must check with your electrician on cable size.
1 Phase Cable (3-wire/4 core) – 4mm sq cable up to 40m, 6mm sq cable up to 60m, 10mm sq up to 110m, 16mm sq up to 170m
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.
Stainless Steel Support Cable – Available in 3mm cable or 4mm cable
Stainless Steel Support Cable Grips/Clamps – Available in 3mm or 4mm to suit S/S Cable
Pressure Gauges Liquid Filled 63mm – Available in 0-800 kPa, 0-1000 kPa, 0-1600 kPa and 0-2500 kPa
Single 1 Phase Motor Protection
If you purchase a single phase 3-wire kit, then you will need a Pumptec Plus as your motor protection device.
3 Year Warranty
Brand | Franklin Electric |
---|---|
Model-number | FPS-12A-23 |
litres-per-minute | 200 |
kw-hp | 3.7 / 5 |
Outlet-size | 2" |
Size | 4 Inch |
Phase | 3-wire 1 phase |
Warranty-period | 3 Years |
3hp Single 1 Phase 3-wire. Max Flow = 112LPM @ 60m head. Best performance =…
1.5hp Single 1 Phase 3-wire. Max Flow = 56LPM @ 67m head. Best performance =…
0.75hp Single 1 Phase 3-wire. Max Flow = 56LPM @ 35m head. Best performance =…
3hp/2.2kw - Three 3 Phase. Max Flow = 340LPM @ 22 head. Min Flow =…