Online Sales of Water Pumps Speedy Delivery Australia Wide Every Day
Items : 0
Subtotal : $0.00
View CartCheck Out
Online Sales of Water Pumps Speedy Delivery Australia Wide Every Day

Call us Now
047 789 9942

Items : 0
Subtotal : $0.00
View CartCheck Out

150LPM = 2.5LPS at 24m head Franklin 2-wire 1 Ph Bore Pump FPS-9A-07TS


1.5hp/1.1kw – Single 1 Phase 2-wire.   Max Flow = 170LPM @ 15m head.   Min Flow = 90LPM @ 36m head

Additional information

FPS9A-07 2-wire 1 Phase Franklin Electric 4 Inch Submersible Pump and Motor Assembly

Assembly includes pump and motor only.

4400 Tri-Seal 4-Inch Bore Pump and Motor Kit.
9m³/h flow ratings
150 liters per min / 2.5 liters per second @ 24m head

The FPS-9A-07TS has a 1.1kw/1.5hp 2-wire 1 phase motor.
The 2-wire 1 phase doesn’t require a starter box.

Receive a FREE 4″ Splice Kit with every Franklin Bore Pump and Motor Combination.

Receive a FREE External 2″ BSP Check Valve

There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below.

Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.

Options to purchase with your kit to suit this pump

Bore Cap
This model has a 2″ (50mm) discharge thread, so if you are using 50mm pipe diameter then a 2″ Bore Cap would be recommended. If you are using a 1.5″(40mm) pipe diameter then a 1.5″ Bore Cap would be recommended.

Shroud Adapter
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 50mm pipe diameter then a 50 x 100mm (2″ riser) PVC Shroud Adapter would be recommended.

Electrical Cable
The info below is a guide only, you must check with your electrician on cable size.
1 Phase Cable (2-wire/3 core) – 1.5mm sq cable up to 40m, 2.5mm sq cable up to 70m, 4mm sq 
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.

Stainless Steel Support Cable – Available in 3mm cable or 4mm cable

Stainless Steel Support Cable Grips/Clamps – Available in 3mm or 4mm to suit S/S Cable

Pressure Gauges Liquid Filled 63mm – Available in 0-800 kPa, 0-1000 kPa, 0-1600 kPa and 0-2500 kPa

Flexible Riser Pipe
– Series 100 is for depths up to 100. The sizes are 32 mm and 50 mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm, 50mm, 76mm, 102mm, 127mm, 152mm & 200mm internal diameter.
– As well as the Couplings, ties, joiners and installation roller.

Single 1 Phase Motor Protection
If you purchase a single phase 2-wire or 3-wire kit, then you will need a Pumptec as your motor protection device.

3 Year Warranty


Franklin Electric






1.1 / 1.5




4 Inch


2-wire 1 Phase


3 Years