Call us Now
047 789 9942
$668.00
Max Flow = 252LPM. Max Head = 6m. Extra Heavy Duty. Can Run Dry for short periods
Highest capacity extra heavy duty 12VDC electric bilge pumps with 50mm (2″) hose outlet will deliver a huge 252 Litres Per Minute (4000 US gallons per hour – 1 gallon per second at open discharge). They have extra heavy duty motors and are designed and built to give years of reliable service.
The 12VDC electric bilge pumps are mainly used as a bilge or bait pump but can be used as a water drainage pump where normal 240V power is not available.
The High Capacity 12VDC electric bilge pumps are a totally submersible Super reliable, commercial quality construction and performance pump with double insulated, dual water / air cooled motors manufactured by Rule specifically for marine pump use.
The pumps are ignition protected (will not create a spark) and they won’t burn out if run dry for short periods.
Moisture tight wiring, anti-airlock feature, stainless steel shaft and Rule’s exclusive Teflon seals combine to give total reliability and high performance.
These pumps include a snap-on strainer base for easy cleaning and fitting, stainless mounting screws and a clip to secure a float switch to the pump.
As this is a Manual Rule Bilge Pump, it requires a Rule float switch RWB19 or RWB98 to operate automatically.
I have included a flow chart, however the output, water flow and pumping height will vary depending on battery charge and type of installation.
Brand | Rule |
---|---|
Outlet-size | 50mm |
maximum-litres-per-minute | 252 |
Fully Submersible. Max Flow = 50LPM. Max Head = 3.5m. Ignition Protected
Fully Submersible. Max Flow = 50LPM. Max Head = 3.5m. Ignition Protected
Fully Submersible. Max Flow = 50LPM. Max Head = 3.5m. Ignition Protected
Fully Submersible. Max Flow = 31LPM. Max Head = 3.5m. Ignition Protected