Jabsco Par-Max HD6 high pressure water pumps

Jabsco 24V DC High Pressure Pump provides exceptional flow and consistent water pressure to easily handle the demand of multiple outlets at one time.

The Jabsco Par-Max HD6 Fresh Water pumps offer high pressure up to 60PSI with 22.7Litres per minute water flow and consistent water pressure to easily handle the demand of up to 5 x 20mm outlets at one time.

The 5 chamber Par-Max HD6 pumps use the latest technology in design and construction to offer exceptional life and service, backed by Jabsco’s 3 Year limited warranty.

• High capacity flow up to 22.7LPM (6 GPM)
• Smooth Flow
• Quiet operation
• Sealed automatic pressure switch 60 PSI, tested over 4 million cycles without failure
• Can be run-dry for short periods without damage
• Corrosion resistant materials
• High pressure and flow serves up to 5 outlets
• Built in pulsation dampening by pass valve controls unwanted cycling and reduces noise
• All PAR-Max HD6 models include soft rubber mounts
• Large 23mm port size plug-in hose ports. 2 x 20mm barbed included
• Can be installed vertically and horizontally
• Self priming up to 2.1 metres
• Powerful heavy duty ignition protected motor with thermal protection TCO
• An inlet pump strainer should be fitted (included)

The Jabsco 24V DC High Pressure Pump comes with installation instructions included in the box. Please read and follow the instructions.

Accumulator Tanks – Not included

Accumulator tanks hold a reservoir of air and water down stream from the pump. The air acts as a cushion, absorbing pump and pressure fluctuations, smoothing the flow and making the system quieter. Accumulators allow the pump to reach shut-off pressure more smoothly which reduces the on/off cycle which gives better control of hot water delivery.
Our accumulator tanks all have a bladder that separates water from air. The bladder is pre-pressurized but may need fine tuning when installed to give the most efficient performance. One of the advantages of an accumulator tank is that they can dispense up to half of their capacity of water even when the pump is switched off. So the bigger the reservoir, the more water you have available without having to switch the pump on helping you wash your hands or clean your teeth without noise.

PumpGardTM Strainers – Now included
Inlet Strainers are an essential part of any fresh water system using a diaphragm pump – protecting the valves from small particles in the water. Our Pumpgards™ have been designed for easy installation and rapid filter screen cleaning having a transparent bowl that screws off to allow simple, regular inspection.