7.5hp/5.5kw – Three 3 Phase. Max Flow = 340LPM @ 49m head. Min Flow = 170LPM @ 92m head
Assembly includes pump and motor only.
4400 Tri-Seal 4-Inch Bore Pump and Motor Kit.
16m³/h flow ratings
270 liters per min / 4.5 liters per second @ 68m head
The FPS-16A-25TS has a 5.5kw/7.5hp 3 phase motor.
The 3 phase will require a 3 phase contactor/starter which will need to be ordered separately.
Receive a FREE 4″ Splice Kit with every Franklin Bore Pump and Motor Combination.
Receive a FREE External 2″ BSP Check Valve
There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, pressure gauge, etc. These are listed below.
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this pump
This model has a 2″ (50mm) discharge thread, so if you are using 50mm pipe diameter then a 2″ Bore Cap would be recommended. If you are using a 1.5″(40mm) pipe diameter then a 1.5″ Bore Cap would be recommended.
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 50mm pipe diameter then a 50 x 100mm (2″ riser) PVC Shroud Adapter would be recommended.
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.
3 Phase Contactor
The correct size contactor for this model is a 5.5kw/7.5hp contactor
Three 3 Phase Motor Protection
If you purchase a 3 Three phase kit, then you will need a Submonitor as your motor protection device.
3 Year Warranty
5.5 / 7.5
10hp Three 3 Phase. Max Flow = 350LPM @ 65m head. Best performance = 300LPM…
3hp Three 3 Phase. Max Flow = 280LPM @ 20m head. Best performance = 200LPM…
3hp Single 1 Phase 3-wire. Max Flow = 112LPM @ 60m head. Best performance =…
5hp/3.7kw - Three 3 Phase. Max Flow = 340LPM @ 37m head. Min Flow =…