7.5hp/5.5kw 4 Inch Motor – Max Flow = 416LPM @ 43m head. Min Flow = 216LPM @ 90m head
This model has a 6 Inch pump end with a 4 Inch motor.
19m³/h flow ratings
317 liters per min / 5.3 liters per second @ 73m head
The 19SR-9 has a 4″ 5.5kw/7.5hp 3 phase motor.
This 3 phase pump will require a 5.5kw 3 phase contactor/starter which will need to be ordered separately.
Receive a FREE 6″ Splice Kit with every Franklin Bore Pump and Motor Combination.
There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. The bore pump accessories are available on the website.
Please be sure that your pump and accessory selection is correct before you purchase.
You must check with your electrician on cable size.
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.
Three 3 Phase Motor Protection
If you purchase a 3 Three phase kit, then you will need a Submonitor as your motor protection device.
2 Year PMA warranty.
3 Year Warranty when you purchase a Pump and Motor Assembly with a Submonitor.
5.5 / 7.5
3hp/2.2kw - Single 1 Phase 3w-PSC. Max Flow = 300LPM @ 21m head. Min Flow…
3hp/2.2kw - Single 1 Phase 3w-PSC. Max Flow = 180LPM @ 30m head. Min Flow…
2hp/1.5kw - Single 1 Phase 3w-PSC. Max Flow = 180LPM @ 25m head. Min Flow…
0.75hp/0.55kw Single 1 Phase 2-wire. Max Flow = 80LPM @ 22m head. Min Flow =…