25 Litres Per Minute – 1.1kw
All Fhoton SolarPAKS include: 1 x Solar Pump, 1 x Solar Motor, 1 x Fhoton Solar Controller
Fhoton™ Drive provides water to remote locations by converting high voltage, direct current from a solar array into alternating current to run a standard AC submersible motor. The controller provides fault detection, motor soft start, and speed control. The Fhoton™ Drive is designed to provide these features with the plug and play ease of installation similar to a single-phase control box.
The controller drives the pump and motor to deliver water even under adverse conditions, reducing output as necessary to protect the system components from damage, and only shutting down in extreme cases. Full operation is restored automatically whenever abnormal conditions subside.
Electronic monitoring gives the controller the capability to monitor the system and automatically shut down in the event of:
• Dry well conditions – with smart pump monitoring
• Bound pump – with auto retry
• High voltage surge
• Low input voltage
• Open motor circuit
• Short circuit
• Dead-head/no flow conditions (when using a flow switch)
NOTE: This drive provides motor overload protection by preventing motor current from exceeding service factor amps. This drive does not provide over-temperature sensing of the motor.
Solar Pump Selector – A handy tool for easy Solar Pump Selection.
For info and help on How to use the Solar Pump Selector, please click here.