Online Sales of Water Pumps Speedy Delivery Australia Wide Every Day
Items : 0
Subtotal : $0.00
View CartCheck Out
Online Sales of Water Pumps Speedy Delivery Australia Wide Every Day

Call us Now
047 789 9942

Items : 0
Subtotal : $0.00
View CartCheck Out

270LPM = 4.5LPS at 34m head Franklin 3-wire 1 Ph Bore Pump FPS-16A-13TS


3hp/2.2kw – Single 1 Phase 3-wire.   Max Flow = 340LPM @ 22m head.   Min Flow = 170LPM @ 45m head

Additional information

FPS16A-13 3-wire 1 Phase Franklin Electric 4 Inch Submersible Pump and Motor Assembly

Assembly includes pump, motor and 1 Phase starter box.

4400 Tri-Seal 4-Inch Bore Pump and Motor Kit.
16m³/h flow ratings
270 liters per min / 4.5 liters per second @ 34m head

The FPS-16A-13TS has a 2.2kw/3hp 3-wire 1 phase motor.
The 3-wire 1 phase require a starter box which comes standard when you buy this combination.

Receive a FREE 4″ Splice Kit with every Franklin Bore Pump and Motor Combination.

Receive a FREE External 2″ BSP Check Valve

There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, pressure gauge, etc. These are listed below.

Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.

Options to purchase with your kit to suit this pump

Bore Cap
This model has a 2″ (50mm) discharge thread, so if you are using 50mm pipe diameter then a 2″ Bore Cap would be recommended. If you are using a 1.5″(40mm) pipe diameter then a 1.5″ Bore Cap would be recommended.

Shroud Adapter
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 50mm pipe diameter then a 50 x 100mm (2″ riser) PVC Shroud Adapter would be recommended.

Electrical Cable
The info below is a guide only, you must check with your electrician on cable size.
1 Phase Cable (3-wire/4 core) – 1.5mm sq cable up to 20m, 2.5mm sq cable up to 40m, 4mm sq cable up to 60m, 6mm sq cable up to 100m
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.

Stainless Steel Support Cable – Available in 3mm cable or 4mm cable

Stainless Steel Support Cable Grips/Clamps – Available in 3mm or 4mm to suit S/S Cable

Pressure Gauges Liquid Filled 63mm – Available in 0-800 kPa, 0-1000 kPa, 0-1600 kPa and 0-2500 kPa

Single 1 Phase Motor Protection
If you purchase a single phase 3-wire kit, then you will need a Pumptec Plus as your motor protection device.

3 Year Warranty


Franklin Electric






2.2 / 3




4 Inch


3-wire 1 phase


3 Years

You may also like…