Rule’s exclusive heavy duty Rule commercial motor. 12V – 126LPM Max
The Rule-Mate 2000GPH (126 LPM) Automatic Heavy Duty Bilge Pump has Rule’s exclusive heavy duty Rule commercial motor and “Spongeability” feature. It is an all-in-one bilge pump and switch with no float switch required. The innovative design incorporates the bilge pump and water sensor in a single housing.
The unique Rule “Spongeability” feature leaves the bilge the driest ever – when water in the bilge reaches a certain height the solid state sensor automatically activates and the pump runs until the water is pumped out, reducing boat weight, saving fuel and minimizing bilge odour.
Pump check feature – simply touch the pump check button on the pump and hold for a few seconds to test cycle the pump.
These pumps have Threaded discharge ports – 2 hose sizes for easy installation. They are supplied with 2 x straight threaded outlet ports – 1 x straight to suit 25mm (1″) hose & 1 x straight to suit 28mm (1 1/8″) hose.
Available in 12 volt or 24 volt. Both pumps have a base footprint size of 150 x 100mm
Rule bilge pump control panels – These Rule 3 way control panels can be used to control and indicate operation of all Rule bilge pumps and will allow the Rule-Mate pumps to function with a manual over-ride operation feature using the 3rd wire supplied in the wiring harness of the pump.
The control panel options are: RWB107 12 volt or RWB5188 24 volt
Max Flow = 57LPM. Max Head = 3.5m. 0LPM @ 4m head. Fits into tight…