Online Sales of Water Pumps Speedy Delivery Australia Wide Every Day sales@strongmanpumps.com.au
0
Items : 0
Subtotal : $0.00
View CartCheck Out
Online Sales of Water Pumps Speedy Delivery Australia Wide Every Day sales@strongmanpumps.com.au

Call us Now
047 789 9942

0
Items : 0
Subtotal : $0.00
View CartCheck Out

Rule-Mate 12V 500GPH Automatic Submersible Bilge Pump

$177.00

Rule “Spongeability” feature leaves the bilge the driest ever. 12V – 31LPM Max

SKU: RWB822 Categories: ,
Description
Additional information

Rule-Mate 500 GPH Automatic Submersible Bilge Pump

The Rule-Mate 12V 500GPH Automatic Submersible Bilge Pump has Rule’s exclusive “Spongeability” feature. It is an all-in-one bilge pump and switch with no float switch required.  The innovative design incorporates the bilge pump and water sensor in a single housing.

The unique Rule “Spongeability” feature leaves the bilge the driest ever – when water in the bilge reaches a certain height the solid state sensor automatically activates and the pump runs until the water is pumped out, reducing boat weight, saving fuel and minimizing bilge odour.

Pump check feature – simply touch the pump check button on the pump and hold for a few seconds to test cycle the pump.

The Rule-Mate 12V 500GPH Automatic Submersible Bilge Pump has a threaded discharge port with O ring seal and are supplied with both 90 degree and straight hose ports – 20mm for 500 & 800 GPH – 28mm for 1100 GPH model.

Available in 12 volt or 24 volt (1100 only).

  • Fully automatic all-in-one submersible bilge pump systems
  • No separate float switch required
  • Bilge water sensor and pump in one common housing
  • Pump and sensor are internally common wired for easy installation
  • No battery drain other than when the pump is in use
  • Removable strainer and impeller area are accessible to clear debris
  • Threaded discharge ports for easy installation
  • 1 each straight and 90 degree hose ports supplied with the pump
  • A 3rd wire allows for manual over-ride using a Rule switch panel (see below – RWB23 or 107  12volt,  RWB24 or 5188  24volt)  or it can activate an alarm or indicator lamp if desired
  • Thermal overload protection
  • Single touch pump check test button feature
  • 3 different capacities 500 – 800 – 1100 gallons per hour
  • 3 year limited warranty

All pumps are oval shaped – base footprint size : 110mm x 70mm.

500 GPH 31 LPM

12 volt 1.8 amp

Fuse size 4 amp

Supplied with 1 x 20mm (3/4″) threaded straight hose outlet

 

Rule bilge pump control panels – These Rule 3 way control panels can be used to control and indicate operation of all Rule bilge pumps and will allow the Rule-Mate pumps to function with a manual over-ride operation feature using the 3rd wire supplied in the wiring harness of the pump.

The control panel options are: RWB23 12 volt or RWB24 24 volt, RWB107 12 volt or RWB5188 24 volt

Brand

Rule

maximum-litres-per-minute

31