Submersible Pressure Pump

Submersible pressure pump – Multistage with integrated pressure control and run-dry protection.

Safe for drinking water to AS/NZS4020 standard.

This submersible pressure pump / drainage pump comes complete with a built pressure switch and integrated run-dry protection. Also supplied with a mini pressure tank which must be installed close to the discharge of the pump.

Model Number = RPS34E
Rated Flow = 40LPM @ 22m head
Max Flow = 80LPM
Max Head = 32m
Inlet / Outlet = 25mm / 1″
Number of Taps = 4 to 6
Warranty = 2 Years

The compact design and base allows for easy application in a rain water tank or for draining clean water from underground or above ground tanks and pits. Works in Rain to Mains systems.
These pumps are completely constructed in non-corrosive material and are fitted with 10m cable for easy connection to power supply.

Applications for the Submersible Water Pressure Pump

• Clean Water & Potable Water Transfer
• Household & Drinking Water Supply
• Rainwater Tanks
• Rain to Mains Backup Systems

Features and Benefits

• Automatic start and stop
• Integrated Pressure Controller with 220kPA / 2.2 Bar cut-in
• Integrated run-dry protection
• Valve blockage protection system
• Integrated check valve
• Compact design
• Water-cooled motor
• Corrosion resistant
• Thermal overload protection
• Max water temp is 35 degrees C

Pump Construction

• Gr 304 Stainless Steel Outer Casing
• PPO Impeller
• AISI 304 Stainless Steel Pump body, motor shaft, handle, cover & screen
• PPO Diffuser
• PPO Polymer float switch
• Alumina, graphite lubricated mechanical seal

NOTE:  Install min 100mm above bottom of tank to keep out of sludge and debris