Pentax 4 Inch Bore Pump with Franklin Electric motor assembly.
Assembly includes pump & motor.
100 liters per min 1.66 liters per second @ 70m head
90 liters per min 1.50 liters per second @ 118m head
80 liters per min 1.33 liters per second @ 160m head
70 liters per min 1.16 liters per second @ 199m head
60 liters per min 1.00 liters per second @ 231m head
50 liters per min 0.83 liters per second @ 256m head
45 liters per min 0.75 liters per second @ 267m head
40 liters per min 0.66 liters per second @ 276m head
35 liters per min 0.58 liters per second @ 285m head
30 liters per min 0.50 liters per second @ 292m head
25 liters per min 0.41 liters per second @ 299m head
0 liters per min 0.00 liters per second @ 322m head
This 4S100-48 has a 4kw / 5.5hp 3 Phase Franklin Electric motor.
The 3 phase motor does require a contactor/starter box which will need to be purchased separately.
There are other bore pump accessories that you will need when you install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this pump
Bore Caps are available with different size discharge threads. Your pipe and adaptor size is what will determine what size discharge thread it will need to connect with. Please keep this in mind when selecting your bore cap.
The splice kit is used to join the motor cable to the electrical drop cable. The splice kit makes a waterproof join.
A pump shroud is needed to cool the motor and is only required if you are installing a 4 Inch pump down 6 Inch or larger casing. A shroud adapter is also available on this site.
3 Phase Cable 3-wire/4 core submersible drop cable is required. However, you must check with your electrician on cable size. He will do volt drop calculations to meet site requirements to comply with AS.
Stainless Steel Support Cable – Available in 3mm cable or 4mm cable.
Stainless Steel Support Cable Grips/Clamps – Available in 3mm or 4mm to suit S/S Cable.
Pressure Gauges Liquid Filled 63mm – Available in 0-800kPa, 0-1000kPa, 0-1600kPa & 0-2500kPa pressure ratings.
Flexible Riser Pipe
– Series 100 is for depths up to 100.The sizes are 32mm and 50mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
– As well as the couplings, ties and joiners.
The installation roller is a device that fits on the top of the bore casing. The rollers make it easy to lift and lower the bore pump down the borehole.
Three 3 Phase Motor Protection
The motor protection device for a 3 phase bore pump motor is the Franklin SubMonitor for 2.2kw to 150kw motors.
There is a 2 year warranty with the Pentax bore pumps coupled with Franklin Electric motors.
|Motor Size||4kw / 5.5hp|
|Phase||Three 3 Phase|
|Rated Flow (LPM)||80|
|Discharge (mm)||32mm – 1.25″|
|Warranty Period||2 Years|
2hp/1.5kw - Single 1 Phase 3w-PSC. Max Flow = 300LPM @ 15m head. Min Flow…
4hp/3kw - Three 3 Phase. Max Flow = 180LPM @ 48m head. Min Flow…
2hp/1.5kw - Three 3 Phase. Max Flow = 180LPM @ 25m head. Min Flow…
2hp/1.5kw - Single 1 Phase 3w-PSC. Max Flow = 180LPM @ 25m head. Min Flow…